&
WARNING Risk of accident due to the
specied tire pressure not being attained
If the specied tire pressure is not reached,
the tire is too badly damaged. The tire sealant
cannot repair the tire in this instance.
The braking and driving characteristics may be
greatly impaired.
#
Do not continue driving.
#
Consult a qualied specialist workshop.
In cases such as the one mentioned above, con-
tact an authorized Mercedes-Benz Center. Or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
#
To increase the tire pressure: switch on the
tire ination compressor.
#
To reduce the tire pressure: press pressure
release button 1 next to manometer 2.
#
When the tire pressure is correct, unscrew the
lling hose from the valve of the sealed tire.
#
Screw the valve cap onto the valve of the
sealed tire.
#
Pull the tire sealant bottle out of the tire ina-
tion compressor.
The lling hose stays on the tire sealant bottle.
#
Drive to the nearest qualied specialist work-
shop and have the tire, tire sealant bottle and
lling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
&
WARNING Risk of an accident due to work
carried out incorrectly on the battery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
can restrict functions relevant for safety sys-
tems and impair the operating safety of your
vehicle.
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
When braking
R
In the event of abrupt steering maneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
#
In the event of a short circuit or a similar
incident, contact a qualied specialist
workshop immediately.
#
Do not drive on.
#
Always have work on the battery carried
out at a qualied specialist workshop.
Breakdown assistance
337
To Next Page
Loading...
Need help?
General
