Windscreen wipers and windscreen washer
system
Switching the windscreen wipers on/off
1
g Windscreen wipers off
2
Ä Automatic wiping, normal
3
Å Automatic wiping, frequent
4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
#
Turn the combination switch to the correct
position 1 - 5.
#
Single wipe/washing: push the button on
the combination switch in the direction of
arrow 1.
R
í Single wipe
R
î Wipes with washer fluid
Replacing the windscreen wiper blades
&
WARNING Risk of becoming trapped if
the windscreen wipers are switched on
while wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
#
Always switch off the windscreen wip‐
ers and ignition before changing the
wiper blades.
Moving the wiper arms to the change posi‐
tion
#
Switch the ignition on and switch off again
immediately.
#
Within around 15 seconds, press the î
button on the combination switch for approx‐
imately three seconds (/ page 140).
The wiper arms will move into the change
position.
Removing the wiper blades
#
Fold the wiper arms away from the wind‐
screen.
140
Light and sight
To Next Page
Loading...
Need help?
General
