96
Controls in detail
Seats
Installing head restraint
왘 Insert head restraint and push it down
to the stop.
왘 Push button 1 and adjust head
restraint to the desired position
(
컄 page 36).
Rear seat head restraints
Head restraint height
Raising:
왘 Manually adjust the height of the head
restraint by pulling it upward.
Lowering:
왘 To lower the head restraint, push
button 1 and press down on the head
restraint.
Head restraint tilt
Manually adjust the angle of the head
restraint.
왘 Push or pull on the upper edge of the
head restraint cushion.
More informations on seats can be found
in the “Getting started” section
(
컄 page 34).
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
To Next Page
Loading...
Need help?
General
