Need help?Do you have a question about the Mercedes-Benz XENTRY Connect and is the answer not in the manual?
General| Brand | Mercedes-Benz |
|---|---|
| Model | XENTRY Connect |
| Category | Medical Equipment |
| Language | English |
General safety instructions for operating the diagnostic systems.
Specific safety precautions for the XENTRY Connect device.
Specific safety precautions for the XENTRY Tab 2 device.
Safety information for the HMS 990 USB Measurement Technology.
Profiles for connecting XENTRY Connect to XENTRY Tab 2 (Workshop/Service24h).
Technical requirements and limitations when using a standard PC.
Step-by-step overview of the initial startup process.
Options for system configuration: dialog-guided or expert.
Procedure for initial startup using expert mode for advanced users.
How to verify connectivity to back-end systems and the internet.
Steps to order and install necessary StartKeys for diagnostic applications.
Description of the connection ports and interfaces available on the XENTRY Connect.
Overview of the XENTRY Connect's display and buttons.
Explanation of LED indicators and acoustic signals for device status.
Specifications and performance details of the XENTRY Tab 2.
Details on connecting and using the HMS 990 USB Measurement Technology.
How to establish a connection and start a diagnostic session.
Location and function of the StartKey Center for managing StartKeys.
Steps for updating the XENTRY Connect.
Procedures for updating the XENTRY Tab 2.
Steps for installing Windows 7 on the XENTRY Tab 2.
Procedure for installing the XENTRY Kit 2 software from the Blu-ray disc.
How to activate and deactivate the AKT mode.
Step-by-step guide to activate the AKT mode.
How the automatic quick test is generated and its process.
Steps to deactivate the AKT mode.
How to report faults and contact the Diagnosis User Help Desk.
To Next Page
