Tube Ref No. Description Where Used Part No.
110
4-Stroke 10W-30
Outboard Oil
I.D. and O.D. of the mounting hub, oil pump inlet/outlet,
cylinder head oil pump bore, camshaft
92-8M0078625
6. Fasten the oil pump to the cylinder head with three M6 x 35 screws. Tighten the screws to the specified torque.
a - Cylinder head
b - Screw (M6 x 35)
Description Nm lb‑in. lb‑ft
Oil pump mounting screws 6.0 53.1 –
Oil Pump
90-8M0125265 eng NOVEMBER 2017 © 2018 Mercury Marine Page 4C-5
To Next Page
Loading...
