Mercury 15 MH - Shallow Water Operation

FEATURES & CONTROLS
59
3. Tilt the engine all the way up until it locked in place.
37535
a
a - Reverse lock lever
4. Tilt down: Pull the reverse lever upward until it stops. This is
the tilt down position.
5. Lift up the engine slightly, and then allow gravity to lower it for
you.
39484
a
b
c
a - Tilt down position
b - Tilt up position
c - Reverse lock lever
Shallow Water Operation
IMPORTANT: When shallow water operation, be careful not to
place your hand between the swivel bracket and the stern
bracket. Besure to tilt the outboard down slowly.
NOTE: Slow down to trolling speed, and shift to the Neutral (N)
before shallow water operating.