MAINTENANCE
86 eng
INSTALLATION
1. Install filter into cover.
2. Secure filter into cover with retainer.
Alternator Belt Inspection
Inspect the alternator belt and have it replaced by an authorized
dealer if any of the following conditions are found:
• Cracks or deterioration in the rubber portion of the belt.
• Belt surfaces rough or uneven.
• Signs of wear on edges or outer surfaces of belt.
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Special Lubricant 101.
Tube
Ref No.
Description Where Used Part No.
34
Special
Lubricant 101
Trim rod ball ends 92-802865Q02
To Next Page
Loading...
