To Next PageTo Next Page
Need help?Do you have a question about the Mercury 150 Verado and is the answer not in the manual?
General| Horsepower | 150 HP |
|---|---|
| Engine Type | Inline 4 |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
| Gear Ratio | 1.85:1 |
| Cylinders | 4 |
| Starting | Electric |
| Gear Shift | F-N-R |
| Exhaust | Through prop |
| Cooling System | Water-cooled with thermostat |
| Engine Protection | SmartCraft Engine Guardian |
| Displacement | 3.0L |
| Alternator Amp | 70 amp |
| Shaft Length | 20 in, 25 in |
| Fuel Type | 87 octane |
| Steering | Hydraulic |
| Bore x Stroke | 4.0 in x 3.6 in (102 mm x 92 mm) |
| Recommended Fuel | 87 octane |
| Oil Capacity | 6.3 qts / 6.0L |
Function, importance, and operation of the safety lanyard stop switch.
Safety precautions when operating near people in the water.
Precautions for operating in shallow water with potential underwater obstacles.
Warning about carbon monoxide poisoning and ventilation.
Procedure for correctly mounting the outboard to the boat's transom.
Guidelines on recommended gasoline types, octane, and additives.
Safe procedures for filling the fuel tank, including capacity and venting.
Recommended types, grades, and specifications for engine oil.
Step-by-step guide for checking and adding engine oil correctly.
Explanation of the power trim and tilt system and its operation.
Procedures and precautions for operating the outboard in shallow water.
Essential checks to perform before starting the outboard engine.
Precautions and procedures for operating in freezing or near-freezing conditions.
Recommendations for flushing and cleaning after use in saltwater or polluted water.
Recommended steps for breaking in a new outboard engine.
Step-by-step guide for starting the outboard engine.
Correct procedure for shifting gears using the remote control.
Procedure for safely shutting down the outboard engine.
Schedule of required inspections and maintenance tasks.
Procedure for flushing the outboard's cooling system with fresh water.
Safety precautions and procedures for servicing the fuel system.
Information on the fuel filter's function and maintenance.
Step-by-step instructions for replacing the outboard propeller.
Procedure for inspecting and replacing spark plugs.
Safety warnings and checks for the DTS wiring system integrity.
Detailed procedure for changing the engine oil.
Steps for removing and installing the engine oil filter.
