a - Latch catch b - Cowl lock latch
TOP COWL INSTALLATION
1. Lower the top cowl over the engine. Bring the front of the cowl
down first and engage the front cowl hook. Lower the cowl into
its seated position with the bottom cowl.
2. Apply downward pressure on the back of the top cowl and in
place by pushing in the cowl lock latch. Ensure the top cowl is
securely fastened by pulling up on the back of the cowl.
Cleaning Care for Top and Bottom Cowls
IMPORTANT: Dry wiping (wiping the plastic surface when it is dry)
will result in minor surface scratches. Always wet the surface
before cleaning. Do not use detergents containing hydrochloric
acid. Follow the cleaning and waxing procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the cowls with clean water to remove
dirt and dust that may scratch the surface.
2. Wash the cowls with clean water and a mild non-abrasive
soap. Use a soft clean cloth when washing.
3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a non-abrasive automotive polish
(polish designed for clear coat finishes). Remove the applied
wax by hand using a clean soft cloth.
To Next Page
Loading...
