Mercury 150 Verado User Manual

OPERATION
95
Gear Shifting
DTS PANEL MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed
is at idle. Do not shift outboard into forward or reverse when the
engine is not running.
• The outboard has three gear shift positions to provide
operation. Forward (F), Neutral (N) and Reverse (R).
3427
F
N
R
• When shifting, always stop at neutral position and allow the
engine speed to return to idle.
• Panel mount remote control requires the operator to always
press shift lock while moving the control handle out of the
neutral position.
3428
• Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed
is at idle. Do not shift outboard into forward or reverse when the
engine is not running.

Mercury 150 Verado Specifications

General

Horsepower	150 HP
Engine Type	Inline 4
Fuel Induction System	Electronic Fuel Injection (EFI)
Gear Ratio	1.85:1
Cylinders	4
Starting	Electric
Gear Shift	F-N-R
Exhaust	Through prop
Cooling System	Water-cooled with thermostat
Engine Protection	SmartCraft Engine Guardian
Displacement	3.0L
Alternator Amp	70 amp
Shaft Length	20 in, 25 in
Fuel Type	87 octane
Steering	Hydraulic
Bore x Stroke	4.0 in x 3.6 in (102 mm x 92 mm)
Recommended Fuel	87 octane
Oil Capacity	6.3 qts / 6.0L