EasyManua.ls Logo

Mercury 175 Verado FourStroke User Manual

Mercury 175 Verado FourStroke
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Outboard
Operation
Maintenance
Warranty
Manual
© 2015 Mercury Marine
200–350 (Including Pro Series) Verado FourStroke
8M0089146 1214 eng

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Mercury 175 Verado FourStroke and is the answer not in the manual?

Mercury 175 Verado FourStroke Specifications

General IconGeneral
Full Throttle RPM Range5800-6400 RPM
Warranty3-Year Limited Warranty
Cylinders4
Engine TypeFourStroke
Horsepower175 hp
Fuel SystemElectronic Fuel Injection (EFI)
Starting SystemElectric
Recommended Fuel87 Octane
SteeringPower Steering
Shaft Length20" or 25"
Alternator Output70 Amps
Weight206 kg (455 lbs)

Summary

WARRANTY INFORMATION

Fuel and Oil

Fuel Recommendations

Specifies the types of unleaded gasoline required for satisfactory engine operation.

Engine Oil Recommendations

Recommends specific SAE 25W-40 synthetic blend marine engine oil for all-temperature use.

Checking and Adding Engine Oil

Details the procedure for checking and adding engine oil, including important notes on overfilling.

Features and Controls

Panel Mount Control Features

Explains the operation of shift and throttle controls on panel-mounted units.

Slim Binnacle Control Features

Describes the features and operation of the single-handle Slim Binnacle control.

Digital Throttle and Shift (DTS) Features

Covers various operational modes for electronic remote control (ERC) levers in DTS systems.

Power Trim and Tilt

Details the operation and adjustment of the outboard's power trim and tilt system.

Operation

Prestarting Check List

Lists essential checks and considerations before starting the outboard engine.

Starting the Engine

Provides a step-by-step guide for starting the engine, including priming procedures.

Gear Shifting

Explains how to shift gears using panel mount and console mount remote controls.

Maintenance

Inspection and Maintenance Schedule

Outlines the recommended inspection and maintenance tasks based on usage intervals.

Propeller Replacement

Provides detailed steps for replacing the propeller on different shaft diameters.

Spark Plug Service

Guides on inspecting, gapping, and replacing spark plugs for optimal ignition.

Changing Engine Oil

Details the procedure for changing engine oil and filter, including capacity and methods.

Gearcase Lubrication

Provides instructions for draining, filling, and checking the gearcase lubricant.

Troubleshooting

Starter Motor Will Not Crank the Engine

Lists possible causes and solutions for the engine starter motor failing to crank.

Installation

Related product manuals