IMPORTANT: Always use new mounting screws when installing trim wear
pads.
a - M6 x 20 screw with patch lock pad (8)
b - Trim wear pad (2)
c - Trim manifold
Description Nm lb‑in. lb‑ft
M6 x 20 screw (8) 6 53 –
Propeller Replacement ‑ 25.4 mm (1.0 in.) Diameter Propeller
Shaft
1. Shift the outboard into neutral position.
2. Straighten the bent tabs on the propeller nut retainer.
To Next Page
Loading...
