Mercury 150 Verado User Manual

MAINTENANCE
97
Outboard Care
To keep your outboard in the best operating condition, it is
important that your outboard receive the periodic inspections and
maintenance listed in the Inspection and Maintenance
Schedule. We urge you to keep it maintained properly to ensure
the safety of you and your passengers, and retain its dependability.
!
WARNING
Neglected inspection and maintenance service of your outboard
or attempting to perform maintenance or repair on your outboard
if you are not familiar with the correct service and safety
procedures could cause personal injury, death, or product failure.
Record maintenance performed in the Maintenance Log at the
back of this book. Save all maintenance work orders and receipts.
SELECTING REPLACEMENT PARTS FOR YOUR
OUTBOARD
We recommend using original Mercury Precision or Quicksilver
replacement parts and Genuine Lubricants.
!
WARNING
Using a replacement part that is inferior to the original part could
result in personal injury, death, or product failure.

Mercury 150 Verado Specifications

General

Horsepower	150 HP
Engine Type	Inline 4
Fuel Induction System	Electronic Fuel Injection (EFI)
Gear Ratio	1.85:1
Cylinders	4
Starting	Electric
Gear Shift	F-N-R
Exhaust	Through prop
Cooling System	Water-cooled with thermostat
Engine Protection	SmartCraft Engine Guardian
Displacement	3.0L
Alternator Amp	70 amp
Shaft Length	20 in, 25 in
Fuel Type	87 octane
Steering	Hydraulic
Bore x Stroke	4.0 in x 3.6 in (102 mm x 92 mm)
Recommended Fuel	87 octane
Oil Capacity	6.3 qts / 6.0L