MAINTENANCE
118
Description Nm lb. in. lb. ft.
Bolts 8 71
11.Reconnect the wiring harness connectors to pencil coil
connections.
a
b
c
3658
a - Wiring harness
connector
b - Pencil coil
c - Bolt
12.Reinstall the rear cowl latch and rear cover. Torque to
specifications.
Description Nm lb. in. lb. ft.
Rear cowl latch - back screws (4) 15 53
Rear cowl latch - top screws with hex
nuts (2)
25 89
Rear cover - screws (2) 15 53
13.Reinstall top cowl.
Fuses
The electrical wiring circuits on the outboard are protected from
overload by fuses in the wiring. If a fuse is blown, try to locate and
correct the cause of the overload. If the cause is not found, the fuse
may blow again.
To Next Page
Loading...
