Features and Controls
Throttle lever ‑ Move to start position for starting. Move lever up to increase
engine speed and down to reduce engine speed.
Choke lever ‑ Move up to the closed position for starting a cold engine. Move
halfway down as engine warms up. Move down to the open position after
engine is warmed up.
Engine stop switch/Lanyard stop switch ‑ Push in or pull lanyard to stop engine.
The engine will not start unless the lanyard is engaged with the stop switch.
Lanyard ‑ Refer to General Information ‑ Lanyard Stop Switch.
a - Engine stop switch/lanyard stop switch
b - Throttle lever
c - Lanyard
d - Choke lever
Fuel shut‑off valve ‑ Turn clockwise to open fuel line and turn counterclockwise
to close.
To Next Page
Loading...
