Mercury 2004 Mountaineer User Manual

Units (English/Metric)
1. Select this function from the
SETUP menu for the current units
to be displayed.
2. Press the RESET control to
change from English to Metric.
Autolocks
1. Select this function from the
SETUP control for the current
display mode.
2. Press the RESET control to turn
the autolocks ON or OFF.
Easy entry/exit (if equipped)
1. Select this function from the
SETUP control for the current
display mode.
2. Press the RESET control to turn
the easy entry/exit feature ON or
OFF. For more information refer to Memory Seat and Pedals in the
Seating and Safety Restraints chapter.
Autolamp delay
1. Select this function from the
SETUP control for the current
display mode.
2. Press the RESET control to select
the autolamp delay time.
Oil Change
1. Select this function from the
SETUP control for the current
display mode.
2. Press the RESET control to reset
oil change.
2004 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
68

Mercury 2004 Mountaineer Specifications

General

Brand	Mercury
Model	2004 Mountaineer
Category	Automobile
Language	English