EasyManuals Logo

Mercury 2006 Montego User Manual

Mercury 2006 Montego
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
If the oil level is within this
range, the oil level is acceptable.
DO NOT ADD OIL.
If the oil level is below this
mark, engine oil must be added
to raise the level within the
normal operating range.
If required, add engine oil to the
engine. Refer to Adding engine
oil in this chapter.
Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage. If the engine is
overfilled, some oil must be
removed from the engine by an
authorized dealer.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to Checking the engine
oil in this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).
2006 Montego (mgo)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
230

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 2006 Montego and is the answer not in the manual?

Mercury 2006 Montego Specifications

General IconGeneral
BrandMercury
Model2006 Montego
CategoryAutomobile
LanguageEnglish

Related product manuals