EasyManua.ls Logo

Mercury 2008 Milan - Removing the Spare Tire and Jack; Stopping and Securing the Vehicle

Mercury 2008 Milan
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When driving with the full-size dissimilar spare tire/wheel additional
caution should be given to:
Towing a trailer
Driving vehicles equipped with a camper body
Driving vehicles with a load on the cargo rack
Drive cautiously when using a full-size dissimilar spare tire/wheel and
seek service as soon as possible.
Stopping and securing the vehicle
1. Park on a level surface, set the parking brake and activate the hazard
flashers.
2. Place the gearshift lever in P (Park) (automatic transmission) or R
(Reverse) (manual transmission) and turn the engine off.
Removing the spare tire and jack
1. Remove the carpeted load floor
panel located in the rear of the
vehicle and remove the lug wrench
and long bolt from the tool bag.
2. Remove the bolt securing the
spare tire using the lug wrench,
then lift and remove the spare tire
from the trunk.
3. Remove the jack retention bolt by
turning it counterclockwise and
remove the jack from the vehicle.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Roadside Emergencies
222

Table of Contents

Other manuals for Mercury 2008 Milan

Related product manuals