Mercury 25 EFI FourStroke - Page 147

INSTALLATION
eng 137
2. Lubricate entire steering cable end with 2‑4‑C with PTFE.
10261
Tube
Ref No.
Description Where Used Part No.
95
2-4-C with
PTFE
Steering cable end 92-802859A 1
3. Install the steering cable seal onto the tilt tube.
4. Install the steering cable and tighten the steering cable nut
to the specified torque.
a - Steering cable nut
b - Steering bracket bolt and washer (2)
c - Steering cable seal
Description Nm lb. in. lb. ft.
Steering cable nut 47.5 35
Steering bracket bolt 30 22.13
a
c
b
10268