MAINTENANCE
44
ob00423
3. Set the spark plug gap to specifications.
ob00680
Spark Plug Gap
Spark plug 0.90 mm (0.035 in.)
4. Before installing spark plugs, clean off any dirt on the spark plug seats. Install plugs finger tight, and then
tighten to the specified value.
Description Nm lb. in. lb. ft.
Spark plug 27 20
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision Special Lubricant 101.
Tube Ref No. Description Where Used Part No.
34
Special Lubricant 101 Trim rod ball ends 92-802865Q1
• Trim Rod Ball Ends ‑ Turn the ball ends to work the lubricant into the ball sockets.
ob01093
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants Anti‑corrosion Grease or 2‑4‑C with
Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867Q1
To Next Page
Loading...
