Mercury 3.3 TwoStroke User Manual

2. Move gear shift lever into neutral.
28385
3. Straighten and remove cotter pin.
28704
4. Pull the propeller off the shaft. If propeller is seized to the shaft and
cannot be removed, have the propeller removed by an authorized dealer.
28706
IMPORTANT: To prevent the propeller hub from corroding and seizing to the
propeller shaft (especially in saltwater), always apply a coat of the
recommended lubricant to the entire propeller shaft at the recommended
maintenance intervals and also each time the propeller is removed.
MAINTENANCE
eng 33

Mercury 3.3 TwoStroke Specifications

General

Brand	Mercury
Model	3.3 TwoStroke
Category	Outboard Motor
Language	English