Mercury 300 XS OptiMax - Steering Cable - Starboard Side Routed Cable

OUTBOARD INSTALLATION
eng 107
2. Thread the lifting eye into the flywheel hub for a minimum of five turns.
a - Lifting eye
3. Connect a hoist to the lifting eye.
4. Lift the outboard and place it on the boat transom.
Lifting Eye 91‑90455‑‑1
2756
Threads into the flywheel to remove the
powerhead assembly from the driveshaft
housing, or to lift entire engine for
removal/installation.
Steering Cable ‑ Starboard Side Routed Cable
1. Lubricate the O‑ring seal and the entire cable end.
3724
95
Tube Ref
No.
Description Where Used Part No.
95
2-4-C with PTFE O-ring seal and entire cable end 92-802859A 1
a
28495