Mercury 300 XS OptiMax User Manual

MAINTENANCE
72 eng
Removal
a - O‑ring seals
b - Filter
c - Raised bosses
1. Disconnect the link rod.
2. Use the shaft of a screwdriver between the filter cap bosses and unscrew
the filter.
Installation
1. Lubricate the O‑ring seals with oil.
2. Install the fuel filter and tighten securely.
3. Connect the link rod.
IMPORTANT: Visually inspect for fuel leakage from the filter while squeezing
the primer bulb until firm, forcing fuel into the filter.

Mercury 300 XS OptiMax Specifications

General

Brand	Mercury
Model	300 XS OptiMax
Category	Outboard Motor
Language	English