Mercury 55 SeaPro - Stopping the Engine; Emergency Starting

• Remote control models—always stop at the neutral position to allow the
engine idle speed to stabilize before shifting into another gear.
• Tiller handle models—reduce the engine speed to idle before shifting into
another gear.
• Always shift the outboard into gear with a quick motion.
• After shifting the outboard into gear, advance the remote control handle or
rotate the throttle grip (tiller handle) to increase the engine speed.
Stopping the Engine
1.
Remote control models ‑ Reduce the engine speed and shift the
outboard to neutral position. Turn the ignition key to "OFF" position.
26843
OFF
ON
START
2.
Tiller handle models ‑ Reduce the engine speed and shift the outboard
to neutral position. Push in the engine stop button or turn the ignition key
to "OFF" position.
26776
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and follow
procedure.
OPERATION
eng 43