To Next PageTo Next Page
Need help?Do you have a question about the Mercury 50 4-Stroke and is the answer not in the manual?
General| Engine Type | 4-Stroke |
|---|---|
| Horsepower | 50 hp |
| Cylinders | 3 |
| Starting System | Electric |
| Steering | Remote |
| Displacement | 747 cc |
| Fuel Induction System | EFI |
| Alternator Amp | 18 amp |
| Shaft Length | 20 in |
| Full Throttle RPM Range | 5000-6000 RPM |
| WOT Range | 5000-6000 RPM |
| Fuel Tank Capacity | External Tank Required |
Details the process for transferring the limited warranty to a new owner.
Explains how to register the product for warranty in the US and Canada.
Outlines the specific warranty coverage for corrosion-related issues.
Clarifies what types of services and damages are covered or excluded.
Defines the operator's duties for safe boat operation and occupant safety.
Explains the function and operation of the emergency engine shut-off switch.
Provides safety guidelines for preventing injuries to swimmers near the boat.
Warns about carbon monoxide poisoning and advises on ventilation.
Lists technical specifications for specific outboard engine models.
Provides instructions and precautions for safely transporting the boat and outboard.
Advises on the correct type, octane, and additives for gasoline.
Specifies the recommended oil type, viscosity, and quality for the engine.
Describes the functions of the remote control unit for operating the outboard.
Explains the audible signals from the horn and their meanings.
Details how to adjust the outboard's position for optimal performance and handling.
Lists essential checks before starting the engine for safe operation.
Outlines the critical steps for breaking in a new engine to ensure longevity.
Step-by-step guide for starting the engine using a remote control.
Explains the procedure for shifting between forward, neutral, and reverse gears.
Provides a schedule for routine checks and servicing to ensure performance.
Instructions for cleaning internal water passages after use in dirty water.
Detailed steps for replacing the propeller on specific gearcase models.
Guide on how to inspect, gap, and replace spark plugs for optimal ignition.
Procedures for draining, checking, and refilling gearcase lubricant.
Key steps to protect the outboard during long-term storage.
Methods to prevent corrosion and damage to internal engine parts during storage.
Guidelines for safely storing and maintaining the battery during the off-season.
Lists common causes and solutions when the engine fails to start.
Identifies potential issues causing the engine to run unevenly and how to address them.
Diagnoses reasons for reduced engine performance and possible fixes.
Recommends using authorized dealers for expert service and genuine parts.
Provides steps for obtaining help with product issues, including contacting Mercury Marine.
General overview and preparation for mounting the outboard onto the boat.
Instructions and tools for accurately drilling mounting holes on the transom.
Details on properly securing the outboard using mounting hardware and specified torque.
Explains the correct fasteners and procedures for the steering link rod connection.
Step-by-step guide for installing the propeller, including torque specifications.
