Mercury 50 4-Stroke - Top Cowl Removal and Installation; Exterior Care; Battery Inspection

MAINTENANCE
67
Top Cowl Removal and Installation
REMOVAL
1. Pull out the rear lock lever and remove the top cowl.
28439
INSTALLATION
1. Lower the top cowl over the engine.
2. Bring the front of the cowl down first and engage the front
hook. Lower the cowl into its seated position and apply
downward pressure to the back of the cowl to lock it in place.
Gently pull up on the back of cowl to make sure it is securely
fastened.
28445
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.