Mercury 50 4-Stroke User Manual

MAINTENANCE
82
e. Signs of wear on edges or outer surfaces of belt.
26958
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
2. Lubricate the following with Quicksilver or Mercury Precision
Lubricants 2‑4‑C with Teflon or Special Lubricant 101.
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon
Tilt support lever,
swivel bracket, tilt
tube, steering cable
grease fitting
92-802859A1
34
Special Lubricant 101
Tilt support lever,
swivel bracket, tilt
tube, co-pilot shaft,
steering cable grease
fitting
92-802865Q0
2
• Tilt Support Lever ‑ Lubricate through fitting.

Mercury 50 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	50 hp
Cylinders	3
Starting System	Electric
Steering	Remote
Displacement	747 cc
Fuel Induction System	EFI
Alternator Amp	18 amp
Shaft Length	20 in
Full Throttle RPM Range	5000-6000 RPM
WOT Range	5000-6000 RPM
Fuel Tank Capacity	External Tank Required