Need help?Do you have a question about the Mercury 4-STROKE and is the answer not in the manual?
General| Engine Type | 4-Stroke |
|---|---|
| Fuel Type | Gasoline |
| Cooling System | Water-cooled |
| Ignition System | CDI (Capacitor Discharge Ignition) |
| Starting | Manual / Electric |
| Shaft Length | 15", 20", 25" |
| Max Power | Varies by model |
| Full Throttle RPM Range | Varies by model |
| Fuel Induction System | EFI / Carbureted |
| Steering | Remote / Tiller |
| Weight | Varies by model |
| Fuel Tank Capacity | Varies by model, some models include external tank |
| Oil Capacity | Varies by model |
Covers crucial safety measures for steering, engine kill switches, people in water, and potential hazards.
Details required gasoline types, octane ratings, and potential effects of alcohol in fuel.
Step-by-step guides for starting the engine using tiller or remote controls, including cold/hot/flooded engines.
Details recommended maintenance tasks based on usage intervals (each use, 100 hours, 300 hours).
Covers spark plug inspection, timing belt checks, and engine oil changes.
Guides on lubricating various points, servicing the gearcase, and checking lubricant levels.
Steps to prepare the outboard for storage, including fuel system treatment and external component care.
Addresses common problems like the starter not cranking or the engine failing to start.
Guides on mounting the outboard to the transom and required transom height specifications.
To Next Page
