To Next PageTo Next Page
Need help?Do you have a question about the Mercury 6 4-Stroke and is the answer not in the manual?
General| Engine Type | 4-Stroke |
|---|---|
| Cylinders | 1 |
| Starting System | Manual |
| Full Throttle RPM Range | 5000-6000 RPM |
| Steering | Tiller |
| Horsepower | 6 HP |
| Shaft Length | 15 in |
Warning about exceeding a boat's maximum horsepower limit and potential consequences.
Explanation of the lanyard stop switch function and its importance for operator safety.
Safety advice for preventing injuries to people in the water, both while cruising and stationary.
Technical specifications for international 4/5/6 4-stroke models, including horsepower and dimensions.
Steps for correctly installing the outboard onto the boat's transom.
Procedures for safely carrying, storing, and transporting the outboard when detached from the boat.
Recommended types of gasoline for US/Canada and international use, including oxygenated fuels.
Safety precautions and procedures for filling the fuel tank to prevent fires or explosions.
Recommended engine oil types and viscosity grades for various temperature conditions.
Essential checks to perform before starting the outboard engine.
Crucial steps for the initial break-in period to prevent severe engine damage.
Detailed instructions for starting the outboard engine, including fuel system and choke use.
Schedule of maintenance tasks to be performed before each use, after each use, and every 100 hours.
Step-by-step guide for safely removing and installing a new propeller.
Procedure for inspecting, testing, and replacing spark plugs for optimal engine performance.
Procedure for draining and refilling the engine oil, including capacity and inspection tips.
Instructions for checking, draining, refilling, and inspecting gearcase lubricant for water or metal.
Procedures to prepare the outboard for out-of-season or prolonged storage to prevent damage.
