2.
Tiller handle models ‑ Reduce the engine speed and shift the outboard
to neutral position. Push in the engine stop button or turn the ignition key
to "OFF" position.
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and follow this
procedure.
!
WARNING
The neutral‑speed‑protection device is inoperative when starting the engine
with the emergency starter rope. Set the engine speed at idle and the gear
shift in neutral to prevent the outboard from starting in gear.
1. Shift the outboard into neutral.
2. Ensure the lanyard stop switch is in the run position.
3. Remove the top cowl.
OPERATION
74 eng
To Next Page
Loading...
