1. If equipped, disassemble the rigging tube to access the fuel line with the
in‑line fuel filter sleeve.
In-line fuel filter sleeve location
2. Remove the clamp securing the vessel fuel line to the adapter and
remove the fuel line from the adapter.
3. Remove the in‑line fuel filter sleeve from the adapter and discard.
4. Install the vessel fuel line onto the adapter and secure with a clamp.
5. Verify the fuel line connection does not have a fuel leak.
6. Assemble the rigging tube, if equipped.
VESSEL MOUNTED WATER SEPARATING FUEL FILTER
This engine requires a vessel mounted water separating fuel filter. The filter
should be replaced annually or 100 hours, whichever occurs first.
MAINTENANCE
94 eng
To Next Page
Loading...
