Mercury L4NA 115 - Digital Throttle and Shift (DTS) Features; Helm Transfer Procedures

Special Digital Throttle and Shift (DTS) Features
The DTS system features several alternate operational modes for the electronic
remote control (ERC) levers.
a
STOP/
START
THROTTLE - ONLY
DOCK TRANSFER
N
b
c
d
e
f
g
52365
h
Slim binnacle ERC
Item Control Function
a
Trim control
(handle)
Raises and lowers the engine for best efficiency, or
for conditions such as shallow water, trailering, etc.
b "Stop/Start"
Allows the operator to start or stop the engine
without the use of the key switch. The key switch
must be in the run position for the start/stop switch
to function.
c "Transfer"
Allows boat control to be transferred to a different
helm.
d "Throttle‑only"
Allows the boat operator to increase engine RPM
for warm‑up without shifting the transmission into
gear.
e "+"
Increases brightness settings for CAN pad,
VesselView and SmartCraft gauges.
f "–"
Decreases brightness settings for CAN pad,
VesselView and SmartCraft gauges.
g "Dock"
Reduces control lever operation throttle capacity to
approximately 50% of normal control lever throttle
demand.
FEATURES AND CONTROLS
52 eng