Item Control Function
g –
Decreases brightness settings for CAN pad,
VesselView and SmartCraft gauges.
h 1 LEVER
Enables the throttle and shift functions of both
engines to be controlled by the port lever.
i SYNC
Turns off or on the auto‑synchronization feature.
Refer to Sync.
NOTE: Not all functions may be active.
Dock
Dock mode reduces throttle capacity to approximately 50% of normal throttle
demand, allowing finer control of engine power in close quarter situations.
DOCK button
Throttle Only
NOTE: Throttle only mode should be used if the captain is not in command at
the helm. Placing the ERC in throttle only mode will avoid unintended gear
engagement. The engines will turn using the steering wheel and the RPM of
the engines can be increased while in the throttle only mode, but the gear
position will remain in neutral.
To Next Page
Loading...
