4. Store the belt in the housing
found on the ceiling by inserting the
smaller tongue in the slot provided.
Note: The seat can be stowed with
the safety belt connected if desired.
Store the tongue of the sliding
latchplate in the belt pocket to
avoid potential damage to the seat.
5. Push the head restraint release buttons and move the head restraints
fully down. Remove all objects from the seat and stowage tub.
6. From the rear of the vehicle, fold seat back by pulling and releasing
the number 1 strap.
2007 Monterey (mty)
Owners Guide (post-2002-fmt)
USA (fus)
Seating and Safety Restraints
130
To Next Page
Loading...
Need help?
General
