Mercury Sable 2000 - To Set a Higher Set Speed; To Set a Lower Set Speed; To Disengage Speed Control

To set a higher set speed
• Press and hold SET +. Release
the control when the desired
vehicle speed is reached or
• Press and release SET +. Each
press will increase the set speed
by 1.6 km/h (1 mph) or
• Accelerate with your accelerator pedal. When the desired vehicle
speed is reached, press and release SET +.
You can accelerate with the accelerator pedal at any time during speed
control usage. Releasing the accelerator pedal will return your vehicle to
the previously programmed set speed.
To set a lower set speed
• Press and hold CST −. Release
the control when the desired
speed is reached or
• Press and release CST −. Each
press will decrease the set speed
by 1.6 km/h (1 mph) or
• Depress the brake pedal. When
the desired vehicle speed is
reached, press SET +.
To disengage speed control
• Depress the brake pedal.
Disengaging the speed control will
not erase the previously
programmed set speed.
SET
+
RES
CST
SET
+
RES
CST
SET
+
RES
CST
Controls and features
45