-A31-
Fault Cause Remedy
Strap is too curved Change strap
Insufficient feeding pressure Adjust feeding pressure according to
5.5
1. Feed jam
Too much strap amount in the
accumulator box and has
caused strap to be curved
Adjust to proper strap amount in the
accumulator box according to 5.1
Other malfunctions
Too much debris on both sides
of heater plate
Clean both sides of the heater plate by
fine sandpaper
Insufficient heater temperature
Increase the heater temperature
according to 5.3
1. Sealing
failure
Insufficient cooling time Increase cooling time according to 4.3
Soft-High tension switch is at
“soft” position
Turn it to “high” position
Lubricant drops into tension
roller incautious Clean the lubricant
2. Insufficient
strap tension
Too much debris in the gear of
tension roller
Clean the debris
To Next Page
Loading...