-A29-
5.6 Adjustment on Tensioning Rollers for High Tension
The machine is already well set for proper feeding pressure for high tension. However,
according to different strap characteristics (such as smoother surface or different thickness),
some adjustments on feeding pressure for high tension might be necessary.
When insufficient strapping tension occurs even the Soft-High tension switch is on “high”
position and it is a result of feeding pressure for high tension, please turn Nut D clockwise.
This can solve the problem of insufficient strapping tension at high tension and strap
slipping between A & B due to this.
Note:
When the feeding pressure for high tension is set too high, the tension for strapping
would get lower.
B
D
A
To Next Page
Loading...