© 2022 MERCUSYS 7107500250 REV1.0.1
Installation Guide
Desktop Switch
* MS108 is used for demonstration in this guide.
Images may dier from actual product.
Connection Diagram
Connect the hardware according to the connection diagram.
FAQ (Frequently Asked Questions)
A1: Make sure that the cable connectors are firmly plugged
into the switch and the device.
A2: Make sure the connected device is turned on and working
properly.
A3: The cable must be less than 100 meters long (328 feet).
Q2. What should I do if the Ethernet LED is off when a device
is connected to the corresponding port?
A1: Make sure the power adapter is connected to the switch
with power source properly.
A2: Make sure the voltage of the power supply meets the
requirements of the input voltage of the switch.
A3: Make sure the power source is ON.
Q1. What should I do if the Power LED is off ?
LED Explanation
Power
On: The power is on.
O: The power is o.
Ethernet Ports
On: The port is connected.
Blinking: The port is sending or receiving
data.
O: The port is not connected.
12345678
12345678
LAN PortWAN Port
Router
Switch
Internet
PC
Power Adapter
Ethernet Ports
Explicación del LED
Alimentación
Encendido: La alimentación está encendida.
Apagado: La alimentación está desconectada.
Puertos Ethernet
Encendido: El puerto está conectado.
Parpadeo: El puerto está enviando o
recibiendo datos.
Apagado: El puerto no está conectado.
Español (Latinoamérica)
Conecte el equipo de acuerdo con el diagrama de conexión.
Français
Explication de la LED
Connectez le matériel conformément au schéma de connexion.
Alimentation
On: le courant est allumé.
O: l'alimentation est éteinte.
Ports Ethernet
On: le port est connecté.
Clignotant: le port envoie ou reçoit des
données.
O: le port n'est pas connecté.
Türkçe
LED Açıklaması
Donanımı bağlantı şemasına göre bağlayın.
Güç
Açık: Güç açıktır.
Kapalı: Güç kapalı.
Ethernet Portları
Açık: Port bağlı.
Yanıp sönüyor: Port veri gönderiyor veya alıyor.
Kapalı: Bağlantı noktası bağlı değil.