Mercusys MS105GP - User Manual

© 2023 MERCUSYS 7107500251 REV1.0.0
LED Explanation
Note: For simplicity, we will take MS108GP for example.
Switch Explanation
O: Ports run at 1000/100/10 Mbps (100/10 Mbps for MS110P) and support PoE power
supply up to 100m away.
On: Ports run at 10 Mbps and support PoE power supply up to 250m away.
Extend (for MS105GP/MS108GP/MS110P)
O: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch nds that the PD works abnormally, the switch will reboot it.
Recovery (For MS110P)
O: Ports can transmit data with each other.
On: Specic ports cannot transmit data with other downlink ports. They can transmit data
only with the uplink ports (port 5 of MS105GP/port 8 of MS108GP/ports 9-10 of
MS110P).
Isolation (For MS105GP/MS108GP/MS110P)
PoE Switch
Quick Installation Guide
For technical support, replacement services, user guides, and other
information, please visit https://www.mercusys.com/support/.
DC Power Adapter
AC Power Cord
Connection
PC
Ethernet Ports (1-8)
PoE Ports (1-7)
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Non-PoE ports (port 5 of MS105GP/port 8 of MS108GP/ports 9-10 of MS110P) are
recommended to connect to uplink devices like routers.
3. Ports 1-2 have higher priority than other ports in transmitting data if network
congestion occurs. It is recommended to connect key network devices (network
cameras, APs, etc.) to ports 1-2.
Notes:
Internet
IP Camera AP IP Phone
Powered Device (PD)
Power
On: The power is on
O: The power is o
Link/Act
On:
Link present but no activity
Flashing:
Transmitting or receiving data
O:
No link
PoE Status
On:
PoE power provided
O:
No PoE power provided
Note: For MS108GP, the Power LED is on the top right of port 8.

Mercusys MS105GP Specifications

General

Total Power over Ethernet (PoE) budget	65 W
Power over Ethernet (PoE) ports quantity	4
10G support	No
Networking standards	IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	5
Power source	DC
AC input voltage	220 V
AC input frequency	50 Hz
Power consumption (max)	75.15 W
Power consumption (typical)	3.13 W
Jumbo frames	9
MAC address table	2000 entries
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	AC
Switch type	-
Certification	CE, RoHS
Product color	Black
Housing material	Metal
Transmission distance (max)	0.1 km

Weight and Dimensions

Depth	98 mm
Width	99.8 mm
Height	25 mm

Summary

LED Indicators Explanation

Link;Act LED

Explains the Link/Act LED status for network connectivity.

Power LED

Details the Power LED status indicating if the switch is on.

PoE Status LED

Describes the PoE Status LED for PoE power provision.

Switch Functionality

Extend Mode

Explains the Extend mode for increased port reach and PoE distance.

PoE Auto Recovery

Details the PoE Auto Recovery function for abnormal PDs.

Isolation Mode

Describes the Isolation mode for traffic separation between ports.

Connection Guide

Port Connections

Illustrates Ethernet and PoE port connections to devices.

Power and Network Setup

Shows DC power adapter, AC power cord, and internet connections.

Important Connection Notes

Provides key notes on PoE port usage and priority.

Specifications and Compliance

General Specifications

Lists general technical specifications like standards and interface types.

Environmental and Physical Specs

Details operating conditions, temperature, and humidity ranges.

Frequently Asked Questions

Addresses common issues like LED status and PoE power.

Safety Information

Provides essential safety precautions for device use.

Product Label Symbols and Mounting

Product Label Symbols Explanation

Explains the meaning of various symbols found on the product label.

Wall Mounting Specifications

Provides dimensions and screw specifications for wall mounting.