Need help?Do you have a question about the Meridian 565 and is the answer not in the manual?
General| Manufacturer | Meridian |
|---|---|
| Model | 565 |
| Category | Processor |
| Frequency Response | 20Hz - 20kHz |
| Type | Surround Sound Processor |
| Inputs | 6 digital (3 coaxial, 3 optical), 6 analog |
Overview of the processor's unique features and capabilities.
Details on the system's communication link and integrated control.
Highlights features tailored for professional users, like RS232.
A basic surround setup adding a centre speaker to stereo.
A system with front and rear surround speakers for enhanced immersion.
A configuration designed for authentic cinema sound reproduction.
A high-quality analogue surround system setup.
A fully digital system for audiophile-quality surround sound.
Details of a high-end digital theatre setup.
Integrating various media sources into a surround system.
A setup for decoding AC-3 signals from LaserDisc.
Technical details of the processor's inputs, outputs, and processing capabilities.
List of optional accessories like remotes and cables.
Information on different processor versions and upgrade paths.
Explains digital formats like Dolby Digital, DTS, MPEG, and MLP.
Details on the Dolby Digital audio format and its usage.
Details on the DTS audio format and its applications.
Information about the MPEG Surround audio format.
Details on the Pro Logic decoding preset for surround sound.
Preset that enhances Pro Logic for movie theatre sound.
Decoding system for Ambisonic encoded surround sound.
Processing for two-channel stereo sources to create surround.
Preset for extracting music and surround components from recordings.
Processing for a focused stereo image with adjustable width.
Overview of the buttons and indicators on the processor's front panel.
Instructions for powering the unit on, off, and into standby.
How to choose an input source for the processor.
How to control the sound output level and mute audio.
How to select and cycle through different audio processing modes.
How to alter the information shown on the front panel display.
How to secure settings against accidental changes.
Adjusting advanced settings within DSP presets for sound tailoring.
Details on common adjustable parameters like Treble, Bass, Balance, and Centre.
Adjusting frequency response (treble/bass) and signal phase.
Adjusting balance and speaker levels for optimal seating.
Adjusting centre speaker level and delay for front soundstage coherence.
Adjusting rear and side channel delay for creating a sense of space.
Adjusting audio-video synchronization and display settings.
Associating specific DSP presets with input sources.
Creating, naming, and saving custom DSP presets.
Details on the Pro Logic decoding system for surround sound.
THX enhancements to Pro Logic for cinema sound reproduction.
Preset for TV broadcasts with non-surround audio.
Presets for mono films and soundtracks.
Preset for extracting music and surround components from recordings.
Processing for a focused stereo image with adjustable width.
Decoding system for Ambisonic encoded surround sound.
Ambisonic decoding for non-encoded material.
Preset for exciting studio-produced music.
Preset for DTS music CDs with adjusted bass.
Preset for MPEG encoded music CDs.
Presets for comparison and basic stereo reproduction.
Details on the Meridian Lossless Packing format.
Details on the Dolby Digital audio format for movies.
Details on the DTS audio format for movies.
Information about the MPEG Surround audio format for movies.
THX versions of digital formats for cinema.
Information on maintenance and returning the unit for service.
Details on warranty terms and conditions.
To Next Page
