Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
Sayfa :
Güncel dokümanlar için www.merihasansor.com adresini ziyaret ediniz!
Belirtilmeyen tüm ölçü birimleri milimetredir.(mm)
DDC70/DDC80
Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
1-Speed (cm / sn) 6-Closing Slow Way
2-Position (cm) 7-Closing Slow Speed
3-Max. Closing Speed 8-Skate Way
4-Closing Acceleration Way 9-Closing Skate Speed
5-Closing Deceleration Way 10-Door Length
4.3.3 Short Descriptions of Chart
Speed : It shows the speed values that can be reached for the opening and closing points.
Position : It shows the immediate position at the opening and closing points.
Opening and Closing Max Speed : It is the highest speed value that the door will reach during opening
and closing.
Opening and Closing Skate Speed : It is the opening and closing speed value in the skate area.
Skate Way : It is the value showing the skate working area.
Opening and Closing Acceleration Way : These are the values in the acceleration zones of the door for
opening and closing.
Opening and Closing Deceleration Way : These are the values in the deceleration zones of the door
for opening and closing.
Opening Slow Way : It is the way value of the door at slow opening speed up to the limit bumper.
Opening Slow Speed : It is the speed value of the door at slow opening speed up to the limit bumper.
Closing Slow Way : It is the way value of the door at slow speed up to the skate area.
Closing Slow Speed : It is the speed value of the door up to the closing limit bumper.
Door Lenght : It shows clear opening of the door entrance.
4.4.Menu Details
4.4.1.Main Menu
13
To Next Page
Loading...