Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
Sayfa :
Güncel dokümanlar için www.merihasansor.com adresini ziyaret ediniz!
Belirtilmeyen tüm ölçü birimleri milimetredir.(mm)
DDC70/DDC80
Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
Door length will be determined by automatic identification.
The skate way is the distance to be given movement to close the skate during the door
closing.
Opening acceleration indicates the area where the door will move fast during door
opening.
Closing acceleration indicates the distance that the door will move fast during door
closing.
Opening deceleration indicates the distance that the door will move slowly during door
opening.
Closing deceleration indicates the distance that the door will move slowly during door
closing.
Opening slow way indicates the value generated during opening deceleration for the
stopping comfort during door opening.
Closing slow way indicates the value generated during opening deceleration for the
stopping comfort during door closing.
4.4.4.2. Speed Settings
Maximum opening speed is the highest speed value that door will reach in the door opening zone.
Maximum closing speed is the highest speed value that door will reach in the door closing zone.
The opening deceleration speed is the deceleration speed value of the door in the opening zone.
The closing deceleration speed is the deceleration speed value of the door in the closing zone.
Opening skate speed and closing skate speed are the speed values during opening and closing of the skate.
Recognition speed is the door speed value during recognition.
17
To Next Page
Loading...