Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
Sayfa :
Güncel dokümanlar için www.merihasansor.com adresini ziyaret ediniz!
Belirtilmeyen tüm ölçü birimleri milimetredir.(mm)
DDC70/DDC80
Her türlü değişiklik hakkı saklıdır.
KLV-09/Yayın Tarihi : 09.03.2023/Revizyon No: 00 /Revizyon Tarihi:
4.4.4.5.Other Settings
In the interface menu, it is the settings section that will enable the screen to switch to
low mode for the bright screen and to adjust the standby time of the LCD screen without
any operation in the menu entered.
The menus shown for informing the selected skate status and engine direction and
during automatic identification are in the 6th and 7th sub-menus in the settings tab.
It is sent from the factory with parameters in set state. If the user wishes, he can adjust
the door movement comfort according to his own wishes. However, if undesired
movements occur at the door due to the change of parameters, this feature is used to
return the factory settings of the parameters. To return to the factory settings, follow the
instructions on the LCD screen. If the device is not restarted, it will not return to factory
settings.
To Next Page
Loading...