1
HEDRA - FACTORY SETTINGS
7
+OCT
+2 OCT
7
+OCT
+2 OCT
7
+OCT
+2 OCT
7
+OCT
+2 OCT
Hedra Preset 1 “Series Sequence” - 115 bpm (520 ms)
Note: Black pointers = top layer settings. Orange pointers = secondary layer settings.
For secondary controls only, hold ALT button (L LED button) while turning knob. Release ALT button when knob settings are done.
Hedra Preset 2 “Pitch Echo” - 115 bpm (520 ms)
Note: Black pointers = top layer settings. Orange pointers = secondary layer settings. Orange TAP footswitch = half speed enabled.
For secondary controls only, hold ALT button (L LED button) while turning knob. Release ALT button when knob settings are done.
Heel
Heel
Toe
Toe
alt function: scale type
alt
function: scale type
alt
function: scale type
alt
function: scale type
alt
function: time division 1
alt function: time division 1
alt function: time division 1
alt function: time division 1
alt function: time division 3
alt function: time division 3
alt function: time division 3
alt function: time division 3
alt function: time division 2
alt function: time division 2
alt function: time division 2
alt function: time division 2
alt function: pitch correction & glide
alt
function: pitch correction & glide
alt
function: pitch correction & glide
alt
function: pitch correction & glide
alt
function: delay feedback
alt
function: delay feedback
alt
function: delay feedback
alt
function: delay feedback