Need help?Do you have a question about the Meris LVX and is the answer not in the manual?
Conversion and Processing| conversion | 24 bit A/D and D/A |
|---|---|
| DSP | 32 bit floating point |
| sample rate | 48000 Hz |
Input Specifications| input impedance | 1 Meg Ohm |
|---|---|
| max input level (instrument level setting) | +9 dBu |
| max input level (line/synth level setting) | +12.5 dBu |
Performance| SNR | 115 dB Typical |
|---|---|
| frequency response | 20Hz-20kHz |
| bypass | Selectable True Bypass (Relay) or Analog Buffered Bypass |
Power| power requirement | 9V DC center-negative |
|---|---|
| power consumption | 300mA |
| power connector | 2.1mm jack |
Weight and Dimensions| width | 7.25 inches |
|---|---|
| length | 4.5 inches |
| height | 2 inches |
| weight | 24 ounces |
Using C1 to carousel through parameters and C2 to edit their values.
Steps for saving edits, changing name/number, and assigning favorite parameters.
How to assign parameters to L/R sides using C1, C2, and C3 in SAVE AS PAGE.
How to save the preset or cancel the save operation by pressing footswitches.
Performing a quick save without changing name or favorite status.
How to jump to the Favorites bank using footswitches 1 and 2.
Details parameters for LFO A, including Speed, Note Division, and Shape.
Details parameters for LFO B, including Speed, Note Division, and Shape.
Details parameters for Expression Pedal assignment, minimum, and maximum values.
Explains footswitch operations for record, overdub, play/stop, and assignable functions.
How the expression pedal controls scrubbing through the looped audio.
Details on Standard, MultiTap, Multi Filter, Poly, and Reverse delay structures.
To Next Page
