10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
No hardware bag for step 3.
Connect the CONSOLE CABLES
and carefully tuck wires in MAST
to avoid damage. Note: Do not
pinch console cable. Be sure
the console cable prongs are
aligned and the ends are tightly
seated into each other.
Attach CONSOLE CABLE COVER.
Slide the WATER BOTTLE
HOLDER down into the hole in
the CONSOLE and snap together.
WATER BOTTLE HOLDER
CONSOLE
ASSEMBLY STE P 3
A
B
C
D
* NOTE: Be careful not to pinch any
wires while assembling the masts.
To Next Page
Loading...
