9
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY STE P 2
Open HARDWARE BAG 2.
Attach the CONSOLE to the
UPRIGHT MAST using 2 BOLTS
(A), 2 SPRING WASHERS (B), and
2 ARC WASHERS (C).
Repeat on the other side.
A
B
C
BOLT (A) 25 mm Qty: 4
ARC WASHER (C) 17 mm Qty: 4SPRING WASHER (B) 15.4 mm Qty: 4
HARDWARE BAG 2 CONTENTS :
* NOTE: Be careful not to pinch any wires while assembling the masts.
BOLT (A)
SPRING WASHER (B)
ARC WASHER (C)
CONSOLE
UPRIGHT MAST
To Next Page
Loading...
