16
ASSEMBLY STEP 4
A Open hardware bag 4.
NOTE: lock latch must be securely engaged
before proceeding with assembly. (See folding
instructions in TREADMILL GUIDE.)
B Attach the right end cap using 2 screws
(h). Repeat on the other side.
C Connect power cord to a power outlet. The
ON/OFF switch is located next to the power
cord. Flip this switch to the ‘ON’ position. You
will hear a beep and the console will turn on.
D Before the first use, lubricate the treadmill
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
GUIDE.
SCREW (H)
12 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
END CAPS
SCREWS (H)
MAIN FRAME
YOU ARE FINISHED!
To Next Page
Loading...
