Merit 725T - Page 7

7
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
TOOLS INCLUDED
PARTS INCLUDED
1 Safety Key
1 Console Assembly
2 Endcaps
1 Silicone Oil Bottle
1 Deck Lock Latch
2 Frame Extension Tubes
4 Hardware Bags
2 Console Masts
1 Water Bottle Holder
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
5 mm L-wrench
6 mm T-wrench
Phillips Screwdriver
WATER BOTTLE POCKET
CONSOLE ASSEMBLY
HANDLEBAR
SAFTEY KEY PLACEMENT
CONSOLE MAST
MOTOR COVER
RUNNING BELT/RUNNING DECK
SIDE RAIL
ROLLER END CAP
REAR ROLLER
ADJUSTMENT BOLTS
READING RACK
CONSOLE
DECK LOCK LATCH
ON/OFF SWITCH
CIRCUIT BREAKER
POWER CORD
TRANSPORT WHEEL
FRAME EXTENSION