Merits P326A series - User Manual

Merits
P326A
series
Service Manual
Oct.3.2007 V1

Summary

1. Introduction

2. Service guide

2.1. How to replace or repair the seat assembly

Procedures for replacing or repairing the seat assembly and its components.

2.1.1. To replace the seat body

Conditions and steps for replacing the seat body of the powerchair.

2.1.2. To replace the seat base plate assembly

Procedures and conditions for replacing the seat base plate assembly.

2.1.3. To replace the seat post

Guidelines and steps for replacing the seat post.

2.1.4. To replace the left;right armrest

Steps and conditions for replacing the left or right armrest.

2.2. How to replace or repair the body assembly

2.2.1. To replace the main shroud

Instructions for replacing the main shroud of the powerchair body.

2.2.2. To replace the fender

Procedures for replacing the fender, including when it's needed.

2.2.3. To replace the battery pack

Conditions and steps for replacing the battery pack.

2.2.4. To replace the footplate assembly

Guidelines and conditions for replacing the footplate assembly.

2.2.5. To replace the anti-tipper arm assembly - front

When to replace and how to replace the front anti-tipper arm assembly.

2.2.6. To replace the anti-tipper arm assembly - rear

Conditions and steps for replacing the rear anti-tipper arm assembly.

2.2.7. To replace the caster wheel assembly

When to replace and how to replace the caster wheel assembly.

2.2.8. To replace the driver wheel assembly

Conditions and steps for replacing the driver wheel assembly.

2.2.9. To replace the main frame

Conditions and steps for replacing the main frame of the powerchair.

Merits P326A series Specifications

General

Weight Capacity	300 lbs
Battery	12V 35AH x 2
Type	Power Wheelchair
Frame Material	Steel
Brakes	Electromagnetic
Folding	No
Seat Depth	16 inches
Ground Clearance	3 inches
Rear Wheel Type	Pneumatic